Zapco ASP-X4 2/3/4-Way Electronic Crossover

Highlights

Description

The Zapco ASP-X4 is definitely the Mac Daddy of Analog Electronic Crossovers. This unit was designed originally to compliment their new LX models of the Zapco Z-Series amplifiers. The LX are no-compromise no holds barred sound quality competition amplifiers and have no preamp functions other than input sensitivity. It takes a special crossover to meet the standards of an amp like the LX Series and the ASP-X4 has just what it takes and then some.FeaturesExtremely versatile for 2-way 3-way 4-way or 3-way plus full range to fit the most advanced sound systemTwo band pass outputsDual inputs allow fading between the main 3-way system and the rear fillClipping indicators for each outputSwitchable 12/24dB sub crossoverRemote power supplySelectable ground reference for noise elimination9.5 Volt RMS line driverHigh-Quality ComponentsTo begin the very same high end audio grade Elna Silmic ll capacitors and OP275 op-amps used in the LX amps are also used in the ASP-X4 (as well as in the other Zapco competition grade processors). Another important factor in the sound quality is the quality of the control pots. They need to be clean precise and must not add distortion. Zapco went out to the maker of the finest pots around and had their own custom high precision pots built for their competition grade processors. Then they built in all that Zapco versatility.VersatilityWith a high pass a low pass and 2 band pass filter systems you can run a 3-way system or a 4-way system. You can even have an active 3-way system and a full range rear fill. And with the dual input system you can fade between the main 3-way system and the rear fill. For that extra little touch the X4 is designed to match the Z-series chassis. Since Zapco assumes this crossover will likely be displayed with the amps they have illuminated the clear plastic protective cover for that extra touch in the installation.What’s in the BoxOne ASP-X4 electronic crossoverRemote power supplyWired remote knobOwner’s manualSpecificationsTHD 0.01%THDSignal to Noise Ratio 110dBStereo Separation 90dBCrossover Slopes 24dBPreamp Output 9.5V RMS / 14V PeakDimensions (W x H x D): 7.48″ x 1.53″ x 8.42″